Products Archive - Page 2 of 3 - Raptor Engineering

Defender Binnacle (Bezel Only)

£15.00 – £21.00

(Bezel £18.00 including vat, Switch Plate £7.20 including vat)
Available for pre-2000 Defenders (prior to TD5 Dash Facelift) and post-2000 to fit the Raptor Defender Binnacle

For those of you with our standard Raptor Steel Defender Binnacle wishing to upgrade to a Deluxe version, an anodised aluminium Bezel is available in Black or Silver to match and complement your existing Raptor Products.

Image 1 - Black Bezel

Image 2 - Silver Bezel

Images 3 & 5 - Examples of Deluxe Binnacle with Silver Bezel

Images 4 & 6 - Examples of Deluxe Binnacle with Black Bezel

Image 7 - Optional switch plate (available in black or silver)

PLEASE NOTE: This product is the BEZEL ONLY. The Defender Binnacle can be purchased separately here.

THIS BEZEL IS NOT SUITABLE FOR THE ORIGINAL PLASTIC BINNACLE

Select options Details
Defender & S111 Console Dash – Replacement Top Panel Only

£16.00
£19.20 including VAT This is a replacement top panel only for those who already own a Raptor Console. If you are requiring a complete Console please see Defender and S111 Console Dash. The panels are made from 2mm aircraft grade anodised aluminium which can be easily cut or drilled to your specific requirements if needed. Special Cuts. Please scroll down the page for panel layout information

There is an extra charge of £12.00 (+vat) for each special cut panel due to programming.

Please ensure you choose the blank "Provide Specifications" option when selecting your panel choice.

Then tick "I would like to provide my own specifications (£12.00+vat)" and provide your specifications in the box provided.
Select options Details
Defender Clock Bezel

£20.00

£24.00 including VAT
Includes Bezel and Switch Plate. Fits perfectly over your existing plastic Binnacle, available in anodised silver or black.

PLEASE NOTE THAT THIS BEZEL IS SUITABLE WITH THE ORIGINAL PLASTIC BINNACLE ONLY AND NOT THE RAPTOR STEEL BINNACLE

Select options Details
S111 Binnacle Trim

£20.42 £24.50 inc.VAT

Series 111 Binnacle Trim in Anodised Silver. To enhance the look of your existing S111 Binnacle or complement your exiting Raptor products. This also fixes the typical issue where the plastic is broken away round the fixing holes. No more washers and superglue. ( Uses your existing screws )

This product is the Facia Trim only and does not include the Binnacle or Binnacle Mount. For the S111 Binnacle Mount please click here.

Add to basket Details
Raptor Defender Binnacle End Panel (Steel)

£20.83 – £25.00

(Standard Binnacle End Panel £25.00 including vat, Binnacle End Panel with Switch Pod £30.00 inc vat) A quality replacement for the poor original plastic Binnacle End Panel. Manufactured in Steel, powder-coated black to complement the look of your existing Raptor Products and Dashboard. If you have the Raptor steel Binnacle and Mount this replaces the last bit of plastic in and around the Binnacle. Transforms the heater controls as they are now held in position with steel and not plastic Comes complete with all fixtures and fittings including a new much stronger fixing point than the original. No drilling or cutting needed just a screwdriver and Allen Key. (Important we only guarantee the fit of this product if you have the Raptor Steel Binnacle and Mount) Also available complete with a 2 Carling Switch Pod (Switches not included) Image 1 Standard Binnacle End Panel Image 2 Binnacle End Panel complete with a 2 Switch Pod (Switches not included) Image 3 Example of Standard Binnacle End Cap Fitted Image 4 Example of Binnacle End Cap with Switch Pod Fitted

Select options Details
Defender & S111 Trim Panel

Rated 5.00 out of 5
£23.00 £27.60 inc.VAT

Due to popular demand Raptor has produced this two-part dash trim that will dramatically improve the look of your dashboard (RHD).

Many Defenders & S111 have been drilled, cut and carved in the soft facia of the dash. Many more have a bad fit and uneven joint between the main dash and corner piece. This steel trim will tidy the cut out in your dashboard and create a perfect fit up to the Raptor Console and also gives the opportunity to securely fit other items to your dash.
PLEASE NOTE OUR TRIM PANELS ARE NOT SUITABLE/COMPATIBLE WITH AIRCON FITTED

Add to basket Details
Defender & S111 Console Dash – Replacement Bottom Panel Only

£28.34
£34.00 including VAT This is a replacement bottom panel only for those who already own a Raptor Console. If you are requiring a complete console please see Defender and S111 Console Dash. The panels are made from 2mm aircraft grade anodised aluminium which can be easily cut or drilled to your specific requirements if needed. If you have a special Raptor Air Conditioning Console you must let us know prior to placing your order as you will need a Special cut panel. Special Cuts. Please scroll down the page for panel layout information

There is an extra charge of £12.00 (+vat) for each special cut panel due to programming.

Please ensure you choose the blank "Provide Specifications" option when selecting your panel choice.

Then tick "I would like to provide my own specifications (£12.00+vat)" and provide your specifications in the box provided.
Select options Details
Defender Binnacle Mount

Rated 5.00 out of 5
£37.08 £44.50 inc.VAT

This is a steel replacement for the poor plastic original Binnacle Mount that is split or broken in many Landrovers. Powder coated in satin black to match its surroundings. This component supports the Binnacle which holds the speedometer, gauges and the heater controls in a Defender.

This part has been produced by Raptor due to constant requests from Defender owners for us to manufacture a replacement for their broken one. When we took this part out of our Defender, we were surprised to find how weak the original part is. On removal one of the tabs that hold the Binnacle in place was already broken off and when testing the strength of the remaining tab we were able to break it off between finger and thumb.
Our Binnacle Mount is suitable for both RHD and LHD vehicles
Image 1 - Defender Binnacle Mount

Image 2 - Example of Defender Binnacle Mount supporting the original plastic Binnacle

As with all Raptor parts this has a lifetime guarantee.

Add to basket Details
S111 Binnacle Mount

£38.75 £46.50 inc.VAT

This is a steel replacement for the poor plastic original Binnacle Mount that is split or broken in many Landrovers. Powder coated in satin black to match its surroundings. This component supports the Binnacle which holds the speedometer, gauges and the heater controls in an S111

This part has been produced by Raptor due to constant requests from Series 111 owners for us to manufacture a replacement for their broken one. When we took this part out of our Defender, we were surprised to find how weak the original part is. On removal one of the tabs that hold the Binnacle in place was already broken off and when testing the strength of the remaining tab we were able to break it off between finger and thumb.

As with all Raptor parts this has a lifetime guarantee.

Also available is our S111 Binnacle Trim, click here.

Add to basket Details
Defender & S111 Glove Box

Rated 5.00 out of 5
£41.00

£49.20 including VAT

Fits Defender & Series 111 up to year 2000 (prior to TD5 Dash Facelift) Suitable for RHD Vehicles only.

Works well as a stand alone product or will complement your Raptor Dash Console, giving lockable out of sight storage in your Dashboard.

The Glove Box is made to the usual high quality Raptor standards from steel and aluminium. The frame is powder coated in black with the choice of black or silver for the aluminium door.

The Glove Box has a vented top so your vents are still functional, letting air flow through the Glove Box into the cab.

Although not a necessity we highly recommend that the Glove Box is fitted along with the optional Raptor Defender Trim Panels for an aesthetically pleasing finish to your dashboard.

Please note the Raptor Defender Trim Panels can only be used if you have the Raptor Dash Console fitted.

Select options Details
Defender & S111 Pod

Rated 5.00 out of 5
£41.00
£49.20 including VAT Steel Dash Top Pod with a choice of interchangeable aluminium front panels. Easily fitted in 5 minutes with supplied clamp that utilises the ash tray hole so there are no holes to drill in your dashboard. Front view is 330mm long at the bottom, 300mm long at the top and 90mm high. Depth is 90mm at the bottom and 80mm at the top. Height at the back is 60mm. Please note the Gauges/Switches & Sockets are not included.
P1 Plain panel to cut to your own requirement

P2 4x 52mm diameter for 4 gauges

P3 2x 29mm Holes For 12v Sockets, 5x Carling Switch Holes

P4 2x 29 mm Holes For 12v Sockets, 5x 12mm Holes for Toggle Switches

P5 7x Carling Switch Holes

P6 2 x 52mm gauges 4 x carling switches

Special Cuts

There is an extra charge of £12.00 (+VAT) for a special cut panel due to programming.

Please ensure you choose the blank "provide specifications" option when selecting your panel choice.

Then tick "I would like to provide my own specifications (£12.00 + VAT)" and provide your specifications in the box provided.
Select options Details
Puma Glove Box

Rated 5.00 out of 5
£41.00 £49.20 inc.VAT

The all steel one piece Puma Glove Box comes ready to fit, no fiddly hinges to fit or line up. The Raptor Puma Glove Box has the hinges already fitted to the steel frame and lid panel. If you can use a screwdriver you can fit this in literally 5 minutes.

Add to basket Details

Shop