Products Archive - Page 2 of 3 - Raptor Engineering

Defender Binnacle

Rated 5.00 out of 5
£68.75 – £83.08

(Standard Binnacle £82.50 including vat, Deluxe Binnacle £92.50 including vat, Switch Plate £7.20 including vat)
A direct replacement for the poor plastic original RHD Binnacle that is broken in many Land Rovers.

The Standard Unit is made from steel with a black powder coat finish. (Image 1 - main image). If you choose to go with the Standard Unit a Bezel in anodised black or silver may be purchased at a later date if required.

For those of you with a Raptor Console or those wishing to upgrade, a Deluxe version is available with an anodised aluminium bezel, available in Black or Silver to match and complement your existing Raptor Console (Images 2 & 3). It is also aesthetically pleasing and gives your gauges a slightly recessed look.

Image 4 - Example of Deluxe Binnacle with Silver Bezel

Image 5 - Example of Deluxe Binnacle with Black Bezel

Image 6 - Optional Switch Plate. This is the replacement for the original Switch Plate located down at your right knee in a Defender, available in anodised silver or black. The hole cut-outs are: 31mm height, 23mm width. Please note this Switch Plate is not suitable or available for Carling/Carling Type Switches.

PLEASE NOTE THAT BOTH THE STANDARD AND DELUXE MODELS DO NOT INCLUDE THE GAUGES ETC.

Although this Binnacle will connect to the original Plastic Binnacle Mount in your Landrover we highly recommend the use of the steel Raptor Binnacle Mount.

No more rattling dashboards, no more broken plastic tabs.
IMPORTANT READ THIS Around the year 2000 (as early as 1998 and as late as 2002) Landrover fitted both pre and post 2000 Binnacles especially NAS. If your Binnacle has the 2 screws holding the warning light cluster in from the front (arrowed in main picture) you need a pre-2000 regardless of the year or registration. If your Binnacle doesn’t have the 2 screws and the cluster is fitted from the back you need a post-2000 regardless of the year of registration. Please note our steel replacement does not have the heater/fan illumination.
PLEASE NOTE: If you wish to purchase the Raptor Binnacle BEZEL ONLY, they are available here >

Select options Details
Defender & S111 Console Dash – Replacement Top Panel Only

£16.00
£19.20 including VAT This is a replacement top panel only for those who already own a Raptor Console. If you are requiring a complete Console please see Defender and S111 Console Dash. The panels are made from 2mm aircraft grade anodised aluminium which can be easily cut or drilled to your specific requirements if needed. Special Cuts. Please scroll down the page for panel layout information

There is an extra charge of £12.00 (+vat) for each special cut panel due to programming.

Please ensure you choose the blank "Provide Specifications" option when selecting your panel choice.

Then tick "I would like to provide my own specifications (£12.00+vat)" and provide your specifications in the box provided.
Select options Details
Defender & S111 Console Dash – Replacement Bottom Panel Only

£28.34
£34.00 including VAT This is a replacement bottom panel only for those who already own a Raptor Console. If you are requiring a complete console please see Defender and S111 Console Dash. The panels are made from 2mm aircraft grade anodised aluminium which can be easily cut or drilled to your specific requirements if needed. If you have a special Raptor Air Conditioning Console you must let us know prior to placing your order as you will need a Special cut panel. Special Cuts. Please scroll down the page for panel layout information

There is an extra charge of £12.00 (+vat) for each special cut panel due to programming.

Please ensure you choose the blank "Provide Specifications" option when selecting your panel choice.

Then tick "I would like to provide my own specifications (£12.00+vat)" and provide your specifications in the box provided.
Select options Details
Defender & S111 Console Dash

Rated 5.00 out of 5
£79.17
£95.00 including VAT Suitable for pre 2000 Defender & Series 111 (prior to TD5 Dash Facelift). The main body of the dash is a fully welded steel construction with a resilient powder coat finish. The front panels are made from 2mm aircraft grade anodised aluminium which can be easily cut or drilled to your specific requirements if needed. The Raptor Dash Console is supplied complete with a top and bottom panel of your choice, CB mounting brackets (fitted) if required, a full size fitting template, spare screws and an allen key for removal and re fitting of the front panels. Please scroll down the page for panel descriptions. The Console can be fitted in around 20 mins with a few basic tools. IF YOUR VEHICLE HAS AIR CONDITIONING YOU MUST LET US KNOW PRIOR TO PLACING AN ORDER AS YOU WILL NEED A CUSTOM AIRCON CONSOLE (£93.33 + VAT) Special Cuts. Please scroll down the page for panel layout information

There is an extra charge of £12.00 (+vat) for each special cut panel due to programming.

Please ensure you choose the blank "Provide Specifications" option when selecting your panel choice.

Then tick "I would like to provide my own specifications (£12.00+vat)" and provide your specifications in the box provided.

PLEASE NOTE - Panel T9 , T16 & T17 are not compatible with panels B1, B3, B6, B7, B8
Need help with fitting? Watch this video >
Select options Details
Universal Cup Holder

£6.66 £7.99 inc.VAT

Cup Holder to be attached anywhere in the vehicle.

Add to basket Details
Stainless Steel Upgrade Screws

£3.04 £3.65 inc.VAT

Polished stainless screws (pack of 20) an upgrade to the standard screws supplied with the Dash Console and Pod. These are marine grade stainless steel and will never rust or tarnish.

Add to basket Details
Single USB Socket

£9.00 £10.80 inc.VAT

Single USB Socket - suitable for Raptor Products purchased after 17.3.14

For 29mm Diameter Hole

12v input, 5v output

Matching 12v Socket available

Add to basket Details
S111 Binnacle Trim

£20.42 £24.50 inc.VAT

Series 111 Binnacle Trim in Anodised Silver. To enhance the look of your existing S111 Binnacle or complement your exiting Raptor products. This also fixes the typical issue where the plastic is broken away round the fixing holes. No more washers and superglue. ( Uses your existing screws )

This product is the Facia Trim only and does not include the Binnacle or Binnacle Mount. For the S111 Binnacle Mount please click here.

Add to basket Details
S111 Binnacle Mount

£38.75 £46.50 inc.VAT

This is a steel replacement for the poor plastic original Binnacle Mount that is split or broken in many Landrovers. Powder coated in satin black to match its surroundings. This component supports the Binnacle which holds the speedometer, gauges and the heater controls in an S111

This part has been produced by Raptor due to constant requests from Series 111 owners for us to manufacture a replacement for their broken one. When we took this part out of our Defender, we were surprised to find how weak the original part is. On removal one of the tabs that hold the Binnacle in place was already broken off and when testing the strength of the remaining tab we were able to break it off between finger and thumb.

As with all Raptor parts this has a lifetime guarantee.

Also available is our S111 Binnacle Trim, click here.

Add to basket Details
Raptor Defender Binnacle End Panel (Steel)

£20.83 – £25.00

(Standard Binnacle End Panel £25.00 including vat, Binnacle End Panel with Switch Pod £30.00 inc vat) A quality replacement for the poor original plastic Binnacle End Panel. Manufactured in Steel, powder-coated black to complement the look of your existing Raptor Products and Dashboard. If you have the Raptor steel Binnacle and Mount this replaces the last bit of plastic in and around the Binnacle. Transforms the heater controls as they are now held in position with steel and not plastic Comes complete with all fixtures and fittings including a new much stronger fixing point than the original. No drilling or cutting needed just a screwdriver and Allen Key. (Important we only guarantee the fit of this product if you have the Raptor Steel Binnacle and Mount) Also available complete with a 2 Carling Switch Pod (Switches not included) Image 1 Standard Binnacle End Panel Image 2 Binnacle End Panel complete with a 2 Switch Pod (Switches not included) Image 3 Example of Standard Binnacle End Cap Fitted Image 4 Example of Binnacle End Cap with Switch Pod Fitted

Select options Details
Puma Pod

£41.00

£49.20 including VAT

A steel and aluminium dash top Puma Pod for fitting extra switches, gauges and controls to your Puma.

Designed to very exacting standards, the Puma Pod is shaped to fit the Puma only, nesting between the air vents which makes this Pod look like the original equipment whilst offering additional space to a very restrictive dashboard.

There are 4 standard panels available as well as the addition of a custom cut service for your specific needs.

Front panel choices:

PP1 Plain panel to cut to your own requirement

PP2 4x 52mm diameter for 4 gauges

PP5 All Carling Switches

PP6 2x 52mm Holes For Gauges & 4x Carling Switches

Special Cuts

There is an extra charge of £12.00 (+VAT) for a special cut panel due to programming.

Please ensure you choose the blank "Provide Specifications" option when selecting your panel choice.

Then tick "I would like to provide my own specifications (£12.00 + VAT)" and provide your specifications in the box provided.

Select options Details
Puma Glove Box

Rated 5.00 out of 5
£41.00 £49.20 inc.VAT

The all steel one piece Puma Glove Box comes ready to fit, no fiddly hinges to fit or line up. The Raptor Puma Glove Box has the hinges already fitted to the steel frame and lid panel. If you can use a screwdriver you can fit this in literally 5 minutes.

Add to basket Details

Shop