Products Archive - Page 3 of 3 - Raptor Engineering

Puma Pod

£41.00

£49.20 including VAT

A steel and aluminium dash top Puma Pod for fitting extra switches, gauges and controls to your Puma.

Designed to very exacting standards, the Puma Pod is shaped to fit the Puma only, nesting between the air vents which makes this Pod look like the original equipment whilst offering additional space to a very restrictive dashboard.

There are 4 standard panels available as well as the addition of a custom cut service for your specific needs.

Front panel choices:

PP1 Plain panel to cut to your own requirement

PP2 4x 52mm diameter for 4 gauges

PP5 All Carling Switches

PP6 2x 52mm Holes For Gauges & 4x Carling Switches

Special Cuts

There is an extra charge of £12.00 (+VAT) for a special cut panel due to programming.

Please ensure you choose the blank "Provide Specifications" option when selecting your panel choice.

Then tick "I would like to provide my own specifications (£12.00 + VAT)" and provide your specifications in the box provided.

Select options Details
Defender TD5 Conversion Panel

£41.66

£49.99 including VAT TD5 Conversion Panel ( Suitable for post 2000 vehicles with TD5 Dash uplift ) This panel is designed to fit over your original dash adding strength and rigidity to the plastic dashboard. It allows you to customise your dashboard adding switches/sockets and facilitates the fitting of either a standard Single or Double Din Radio Unit (Double Din cut out is 182mm x 101mm). If you purchase a panel with additional switches or a Double Din you will need to cut away the plastic as necessary Made from anodised aluminium , available in Silver or Black TD5 1   Standard Din Panel includes all original switch pattern with headlamp levelling* TD5 2 Standard Din Panel includes all original switch pattern without headlamp levelling
TD5 3  Double Din Panel (cut out is 182mm x 101mm) includes all original switch pattern with headlamp levelling*

TD5 4 Double Din Panel (cut out is 182mm x 101mm) includes all original switch pattern without headlamp levelling

TD5 5 Standard Din Panel with headlamp levelling* . The electric window and heated seat switch positions are replaced with Carling type switch cut outs

TD5 6 Standard Din Panel without headlamp levelling . The electric window and heated seat switch positions are replaced with Carling type switch cut outs

*Please note that the Headlamp Levelling Switch in your existing Console needs to be removed and refitted directly into the Raptor Panel (the spindle and knob for the switch are not long enough to be left in the original plastic component). This necessitates cutting out some clearance in your existing plastic panel.

The above configurations are the only panels available - custom cuts are not available for this product.

Select options Details
Defender Extended Fuse Box Cover

£52.08

£62.50 including VAT Suitable for pre 2000 Defender (prior to TD5 Dash Facelift). This Extended Replacement Fuse Box Cover gives extra space for switches, sockets, fuse boxes, isolating switches and other electrical components. Made from black powder coated steel with anodised silver or black interchangeable panels. There are different options for the outer panels as well as custom cuts should you require them. To change a fuse, simply remove the front cover . Dimensions are 375mm (length) x 220mm (height). Please note the sockets must be on the right hand side. Please note the Extended Fuse Box Cover is not suitable for TD5 (post 2000) vehicles. Options for outer panels, available in silver or black anodised:
F1 - Blank Panel .

F2 - 2 x Carling Switch cut outs

F3 - 2 x 29mm Socket holes

F4 - Custom cut as F4 and £10.00 +vat extra
THIS PRODUCT IS NOT SUITABLE FOR VEHICLES WITH AIR CONDITIONING FITTED.

Select options Details
Discovery Dash Console

Rated 5.00 out of 5
£65.00
£78.00 including VAT

Powder coated steel construction with a choice of anodised aluminium front panels in silver or black. 400mm length x 100mm height x 185mm deep. Supplied with all fixings - simply bolts to the top of the original Discovery Dash (bolts pass through vent so no visual holes to drill through the dash). Fits Discovery as pictured and the soft dash Range Rover.

Special Cuts
When designing your custom layout please note the panel size: Length 395mm at the bottom, 360mm at the top. Height is 95mm. There is a frame at the back so you will need to have the holes a minimum of 15mm in from each edge.

There is an extra charge of £12.00 +VAT for a special cut panel due to programming.

Please ensure you choose the blank "D10 Please select this panel if you require a special cut" option when selecting your panel choice.

Then tick "I would like to provide my own specifications (£12.00 + VAT) and provide your specifications in the box provided.
Select options Details
Defender Binnacle

Rated 5.00 out of 5
£68.75 – £83.08

(Standard Binnacle £82.50 including vat, Deluxe Binnacle £92.50 including vat, Switch Plate £7.20 including vat)
A direct replacement for the poor plastic original RHD Binnacle that is broken in many Land Rovers.

The Standard Unit is made from steel with a black powder coat finish. (Image 1 - main image). If you choose to go with the Standard Unit a Bezel in anodised black or silver may be purchased at a later date if required.

For those of you with a Raptor Console or those wishing to upgrade, a Deluxe version is available with an anodised aluminium bezel, available in Black or Silver to match and complement your existing Raptor Console (Images 2 & 3). It is also aesthetically pleasing and gives your gauges a slightly recessed look.

Image 4 - Example of Deluxe Binnacle with Silver Bezel

Image 5 - Example of Deluxe Binnacle with Black Bezel

Image 6 - Optional Switch Plate. This is the replacement for the original Switch Plate located down at your right knee in a Defender, available in anodised silver or black. The hole cut-outs are: 31mm height, 23mm width. Please note this Switch Plate is not suitable or available for Carling/Carling Type Switches.

PLEASE NOTE THAT BOTH THE STANDARD AND DELUXE MODELS DO NOT INCLUDE THE GAUGES ETC.

Although this Binnacle will connect to the original Plastic Binnacle Mount in your Landrover we highly recommend the use of the steel Raptor Binnacle Mount.

No more rattling dashboards, no more broken plastic tabs.
IMPORTANT READ THIS Around the year 2000 (as early as 1998 and as late as 2002) Landrover fitted both pre and post 2000 Binnacles especially NAS. If your Binnacle has the 2 screws holding the warning light cluster in from the front (arrowed in main picture) you need a pre-2000 regardless of the year or registration. If your Binnacle doesn’t have the 2 screws and the cluster is fitted from the back you need a post-2000 regardless of the year of registration. Please note our steel replacement does not have the heater/fan illumination.
PLEASE NOTE: If you wish to purchase the Raptor Binnacle BEZEL ONLY, they are available here >

Select options Details
Defender & S111 Console Dash

Rated 5.00 out of 5
£79.17
£95.00 including VAT Suitable for pre 2000 Defender & Series 111 (prior to TD5 Dash Facelift). The main body of the dash is a fully welded steel construction with a resilient powder coat finish. The front panels are made from 2mm aircraft grade anodised aluminium which can be easily cut or drilled to your specific requirements if needed. The Raptor Dash Console is supplied complete with a top and bottom panel of your choice, CB mounting brackets (fitted) if required, a full size fitting template, spare screws and an allen key for removal and re fitting of the front panels. Please scroll down the page for panel descriptions. The Console can be fitted in around 20 mins with a few basic tools. IF YOUR VEHICLE HAS AIR CONDITIONING YOU MUST LET US KNOW PRIOR TO PLACING AN ORDER AS YOU WILL NEED A CUSTOM AIRCON CONSOLE (£93.33 + VAT) Special Cuts. Please scroll down the page for panel layout information

There is an extra charge of £12.00 (+vat) for each special cut panel due to programming.

Please ensure you choose the blank "Provide Specifications" option when selecting your panel choice.

Then tick "I would like to provide my own specifications (£12.00+vat)" and provide your specifications in the box provided.

PLEASE NOTE - Panel T9 , T16 & T17 are not compatible with panels B1, B3, B6, B7, B8
Need help with fitting? Watch this video >
Select options Details
Defender & S111 Double Din Console Dash

£93.33

£112.00 including VAT Raptor Defender & S111 Double Din Dash Console (suitable for pre 2000 vehicles prior to the TD5 facelift). IMPORTANT please read the whole of this description as it contains critical information regarding this product. The main body of our Double Din Dash Console is a fully welded steel construction with a resilient powder coat finish. The front panels are made from 2mm aircraft grade anodised aluminium available in silver or black. The Console is supplied complete with panels, a full size fitting template, spare screws and an allen key for removal and re fitting of the front panels. The Console can be fitted in around 20 minutes with a few basic tools. Please note this product is not suitable or available for vehicles with air conditioning Double Din cut out is 182mm x 103 mm - this is the standard size for a Double Din Cage, when looking for a Double Din Radio please note most manufacturers will quote the radio size and not the actual Cage size. Universal Cage Mounts are available from the likes of Halfords. Please be aware when buying Double Din Head Units from China that these often don't come with a Mount of any description, some will fit in to a Universal Mount and some will not. There are some units out there usually the full size CD players that come with a Mount that is 113mm tall, these will fit in a 103 Universal Mount or we can provide a 113 cut out ( if you require 113mm please put a note on your order). Also note some manufactures will quote the double din size as 1 dimension such as 7", this is from corner to corner much like measuring a TV, this will not tell you the opening size. Please note that our Double Din Consoles are not available as custom cuts due to the fact that the positioning of the cut out is critical. We strongly recommend you look to our original Dash Console that has more option's, more usable space and a custom cut service available. If you do need a larger screen we would recommend our Defender Dash Console with a single din and that you purchase a CD unit with a pop out double din size screen. Click here to view our original Defender Dash Console. This Double Din Console is not a new product, we have been offering this to those who "must have a Double Din Unit" for many years but we have not made it available on our website until now. As with all Raptor products our Double Din Console is design right protected.

Select options Details
Defender Cubby Box

Rated 5.00 out of 5
£208.33

£250.00 including VAT - available to ship 2-3 working days from payment

Made to the usual high Raptor Engineering standards, this Cubby Box is designed to complement the Raptor Dash Console and Accessories with it's anodised aluminium panels front and back.

Fits 90's Dimensions are 580mm long at its base, 230mm wide and 370mm height. This Cubby Box is not your usual fit all and nothing in particular, this is made to fit the Defender 90 perfectly.

PLEASE NOTE THAT OUR CUBBY BOX IS NOT AVAILABLE FOR OVERSEAS SHIPPING

Select options Details

Shop