£2.95 including VAT
12 V, 20 Amp Switch, available with Red or Blue Light
-
12v/20amp Socket
For 29mm Diameter Hole
-
Out of stock
40 Dash Board Switch Decals These labels are available in silver with black lettering. The self adhesive labels include:- Winch Arm
- Fan
- F Winch
- Winch in
- Winch out
- R winch
- R locker
- F locker
- Fuel
- Charge
- Panic
- Battery 1
- Battery 2
- Spots 1
- Spots 2
- Sidelights
- Driving
- Roof lights
- Hazard
- Gas
- NOS
- Fog lights
- LEDs
- Headlights
- Strobe
- Rear work
- Front work
- Interior light
- Master
- Kill
- Winch out
- Map
- Siren
- Fridge
- Search
- Inverter
- Marker
- Auxiliary 1
- Compressor
- Pump
- Ejector Seat
-
£78.00 including VAT
Powder coated steel construction with a choice of anodised aluminium front panels in silver or black. 400mm length x 100mm height x 185mm deep. Supplied with all fixings - simply bolts to the top of the original Discovery Dash (bolts pass through vent so no visual holes to drill through the dash). Fits Discovery as pictured and the soft dash Range Rover.
Special Cuts
When designing your custom layout please note the panel size: Length 395mm at the bottom, 360mm at the top. Height is 95mm. There is a frame at the back so you will need to have the holes a minimum of 15mm in from each edge.- There is an extra charge of £12.00 +VAT for a special cut panel due to programming.
- Please ensure you choose the blank "D10 Please select this panel if you require a special cut" option when selecting your panel choice.
- Then tick "I would like to provide my own specifications (£12.00 + VAT) and provide your specifications in the box provided.
-
Treat a friend, family member or loved one with one of our gift vouchers. Ideal for any special occasion and can be spent on anything in store. Simply select the value of the voucher you wish to purchase, write a personalised message, then go to checkout. We will then send your voucher out to you. -
£6.00 including VAT
Set of 4 LED Lights.
These fit in the pre machined holes in all Raptor dash console.
The floor and transmission tunnel area of Defenders and S111 are extremely dark even with the interior light on. Drop something and all you can do is feel around for it. These LEDs are just enough to light this area whilst using a very small amount of battery power.
-
Out of stock
20 Amp ON - OFF rocker Switch.
The same size and fittings as a Carling type switch at half the price.
Compatible with all Raptor none round switch cut outs.
These switches have a red LED that lights up when switched on.
-
20 Amp ON-OFF-ON Winch Rocker Switch, sprung to centre making it ideal for winch control.
These switches are the same size and fitting as the Carling type switch at half the price.
The switches have a red and green LED that lights up when activated.
They are compatible with all Raptor none round switch cut outs.
-
The all steel one piece Puma Glove Box comes ready to fit, no fiddly hinges to fit or line up. The Raptor Puma Glove Box has the hinges already fitted to the steel frame and lid panel. If you can use a screwdriver you can fit this in literally 5 minutes. -
£49.20 including VAT
A steel and aluminium dash top Puma Pod for fitting extra switches, gauges and controls to your Puma.
Designed to very exacting standards, the Puma Pod is shaped to fit the Puma only, nesting between the air vents which makes this Pod look like the original equipment whilst offering additional space to a very restrictive dashboard.
There are 4 standard panels available as well as the addition of a custom cut service for your specific needs.
Front panel choices:
PP1 Plain panel to cut to your own requirement
PP2 4x 52mm diameter for 4 gauges
PP5 All Carling Switches
PP6 2x 52mm Holes For Gauges & 4x Carling Switches
Special Cuts
There is an extra charge of £12.00 (+VAT) for a special cut panel due to programming.
Please ensure you choose the blank "Provide Specifications" option when selecting your panel choice.
Then tick "I would like to provide my own specifications (£12.00 + VAT)" and provide your specifications in the box provided.
-
(Standard Binnacle End Panel £25.00 including vat, Binnacle End Panel with Switch Pod £30.00 inc vat) A quality replacement for the poor original plastic Binnacle End Panel. Manufactured in Steel, powder-coated black to complement the look of your existing Raptor Products and Dashboard. If you have the Raptor steel Binnacle and Mount this replaces the last bit of plastic in and around the Binnacle. Transforms the heater controls as they are now held in position with steel and not plastic Comes complete with all fixtures and fittings including a new much stronger fixing point than the original. No drilling or cutting needed just a screwdriver and Allen Key. (Important we only guarantee the fit of this product if you have the Raptor Steel Binnacle and Mount) Also available complete with a 2 Carling Switch Pod (Switches not included) Image 1 Standard Binnacle End Panel Image 2 Binnacle End Panel complete with a 2 Switch Pod (Switches not included) Image 3 Example of Standard Binnacle End Cap Fitted Image 4 Example of Binnacle End Cap with Switch Pod Fitted -
This is a steel replacement for the poor plastic original Binnacle Mount that is split or broken in many Landrovers. Powder coated in satin black to match its surroundings. This component supports the Binnacle which holds the speedometer, gauges and the heater controls in an S111
This part has been produced by Raptor due to constant requests from Series 111 owners for us to manufacture a replacement for their broken one. When we took this part out of our Defender, we were surprised to find how weak the original part is. On removal one of the tabs that hold the Binnacle in place was already broken off and when testing the strength of the remaining tab we were able to break it off between finger and thumb.
As with all Raptor parts this has a lifetime guarantee.