Defender & S111 Console Dash
Ex VAT £70.83
The main body of the dash is a fully welded steel construction with a resilient powder coat finish. The fronts are made from 2mm aircraft grade aluminium which can be easily cut or drilled to your specific requirements if required. We recommend our hard wearing anodised finish which is also available in a choice of colours. (Red and Blue panels are made to order - please contact us with your requirements). Anodising makes for scratch resistant surface.
The Dash Console is supplied complete with CB mounting brackets, a full size fitting template, spare screws and an Alan Key for removal and re fitting of the front panels. The Console can be fitted in around 20 mins with a few basic tools. Please advise if you are fitting it to a motor with air conditioning as there is a slight change to the Console that we need to do prior to delivery.
Special Cuts There is an extra charge of £12.00 for per special cut panel due to programming - please ensure you chose Provide Speficifications(+12.00) in the panel dropdown choice - there is a section in the checkout area to leave a note of your requirements.
Please note that you don't need the Binnical Mount for this product, the Binnical Mount is the part that fits behind the original Speedo Binnical on your Landrover. Once you have picked your top and bottom panel and placed it in your shopping cart you will receive a full Console with everything you require.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
| T1 |
 |
Blank plate. |
| T2 |
 |
2 x 52mm Holes for standards gauges, 230mm of Space for CB or other cut outs. |
| T3 |
 |
3 x 52mm Holes for standards gauges, 160mm of Space for CB or other cut outs. |
| T4 |
 |
3 x 52mm Holes, 140 x 37mm Hole for CB radio that fits. MIDLAND 78,Danita 3000,Thunderpole T1000 |
| T5 |
 |
3 x 52mm Holes, 124 x 38mm Hole for CB radio that fits. MIDLAND 38, 98, 100, 121, 199. |
| T6 |
 |
3 x 52mm Holes, 115 x 30mm Hole for CB radio. |
| T7 |
 |
2 x 52mm Holes, one 55 x 45 square hole, 140 x 37mm Hole for CB radio that fits the same CB’s size as T4. |
| T8 |
 |
2 x 52mm Holes, one 55 x 45 square hole that fits the LR clock, 124 38mm Hole for CB radio that fits the same CB’s size as T5. |
| T9 |
 |
Radio / CD Din only. |
| T10 |
 |
Same CB size as T5, Carling/ARB Locker Switch cut outs. |
| T11 |
 |
Same CB size as T4, Carling/ARB Locker Switch cut outs. |
| T12 |
 |
Carling/ARB Locker Switches cut outs. |
| T13 |
 |
CB only, CB size as T4. |
| T14 |
 |
CB only, CB size as T5. |
| T15 |
 |
3 x 52mm gauge, 151 x 51mm CB. |
| T16 |
 |
Radio/ CD Din + 124 x 38mm CB as T5. |
| T17 |
 |
Radio/ CD Din + 140 x 37mm CB as T4. |
| T18 |
 |
3 x 52mm gauge, 156 x 51 CB |
| T19 |
 |
3 x 52mm gauge + 5 carling switch holes |
| T20 |
 |
2 x 52mm gauge + 8 carling switch holes |
| T21 |
 |
CB only 115 x 44 (Cobra) |
| T22 |
 |
3 x 52mm gauge + CB 115 x 44 (Cobra) |
| B1 |
 |
Standard radio/CD player dim mount cut out. Six 12mm holes for standard switches. Two 27mm holes for 12v lighter sockets. |
| B2 |
 |
Blank plate. |
| B3 |
 |
Standard radio/CD player dim mount cut out. 4 x 12mm holes for standard switches. Four 27mm holes for 12v lighter sockets. |
| B4 |
 |
2 x 52mm gauge. 2 x 27mm holes for 12v sockets. 8 x 12mm holes for standard switches. |
| B5 |
 |
3 x 52mm gauge. 4 x 27mm holes for 12v sockets. 4 x 12mm holes for standard switches. |
| B6 |
 |
Radio/ CD Din only. |
| B7 |
 |
Radio/ CD Din hole + 5 carling switch holes |
| B8 |
 |
Radio/ CD Din hole + 4 carling switch holes + 2 x 12v socket holes |